You are here:Home/Product/Reha Mobility Family/Reha Mobility 300W

Reha Mobility 300W

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dimensions(mm)
300W	PF2408(w/o fan)	24V	8A	L192xW147xH69
300W	PF2410(w/o fan)	24V	10A	L192xW147xH69

Description

Introduction:The 300W sealed series is high frequency battery charger with wide-range AC input adapting to any single-phase grid worldwide with a peak efficiency of 92%, complying with CEC. The charger can be programmed for charging variou types of battery packs. It is widely used for mobilities, wheelchairs, floor machines, pallet trucks, tow tractors, scooters, etc.
size:length x width x height(mm)
housing(IP21):L192*W147*H69

Parameters

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dinmensions(mm)
300W	PF2408(w/o fan)	24V	8A	L192 × W147 × H69
	PF2410(w/o fan)	24V	10A	L192 × W147 × H69

DC Output	12VDC	24VDC	36VDC	48VDC
Max. DC output voltage	16.8V	33.6V	50.4V	67.2V
Max. DC output cuttent	15A	10A	7A	5A
Max. DC output power	300W
Max. interlock current	1A
Support battery types	Wet, AGM, GEL, Li-ion, LiFePO4 and etc.
Protections	Reverse polarity, short circuit, AC surge, sparks and over temperature protection with auto-reset and delay output
AC Input
AC input voltage		100-240VAC ±10%
AC input frequency		50-60Hz ±10%
AC sources		single phase
Max./Nominal AC input current		4A @ 90VAC / 3A @ 120VAC; 1.5A @ 230VAC
Power factor		>0.99@ 120VAC; >0.98@ 230VAC
Environmental
Enclosure grade		IP54
Operating temperature		–10℃～+45℃ (–14℉～113℉)
Storage temperature		–20℃～+70℃ (–4℉～158℉)
Regulatory
Safety		EN60601-1 SAA and UL1310
EMC		EN60601-1-2, ISO7176-21
Peak efficiency		92%, Clifornia Energy Commission (CEC) compliant
Mechanicl
AC input connetor		AC plug or IEC320/C14 connector (customizable)
DC output connector		XLR connector as default, other types of connector optional
Mounting		For portable use. Available to be customized for on-board use.
Cooling method		Sealed, Natural convection cooling via optimal heat sink