You are here:Home/Product/Reha Mobility Family/Reha Mobility 240W-2

Reha Mobility 240W-2

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dimensions(mm)
240W	PF2405L(P)	24V	5A	L165xW95xH55
	PF2406L(P)	24V	6A
	PF2408L(P)	24V	8A

Description

Introduction:The 240W L&LP series of fan-cooled high frequency battery chargers feature wide-range AC input adapting to any single-phase grid worldwide with a peak efficiency of 88%. It can be programmed to charge various types of battery packs, and widely used for wheelchairs, mobilities, floor machines, scooters, e-bikes, etc.
size:length x width x height(mm)
housing(IP21):L165*W95*H55

Parameters

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dinmensions(mm)
240W	PF2405L(P)	24V	5A	L165 × W95 × H55
	PF2406L(P)	24V	6A
	PF2408L(P)	24V	8A

DC Output	12VDC	24VDC	36VDC	48VDC
Max. DC output voltage	16.8V	33.6V	50.4V	67.2V
Max. DC output cuttent	8A	8A	5A	4A
Max. DC output power	150W
Max. interlock current	Pin 3 shorted with Pin 2 (XLR connector)
Support battery types	Wet, AGM, GEL, Li-ion, LiFePO4 and etc.
Protections	Reverse polarity, short circuit, AC surge, sparks and over temperature protection with auto-reset and delay output
AC Input
AC input voltage		100-240VAC ±10%
AC input frequency		50-60Hz ±10%
AC sources		single phase
Power factor		3A @ 90VAC / 2.3A @ 120VAC; 1.2A @ 230VAC
Environmental
Enclosure grade		IP21
Isolation		Class II
Operating temperature		–10℃～+45℃ (–14℉～113℉)
Storage temperature		–20℃～+70℃ (–4℉～158℉)
Regulatory
Safety		EN60335-2-29, SAA, UL1012 & UL1564
EMC		EN55014, C-TICK
Peak efficiency		88%
Mechanicl
AC input connetor		IEC320/C14 connector
DC output connector		XLR connector as defaul, other types of connector optional
Mounting		Off-board / Portable / On-board(customizable)
Cooling method		Forced ventilation cooling with fan