You are here:Home/Product/Reha Mobility Family/Reha Mobility 150W

Reha Mobility 150W

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dimensions(mm)
150W	PF2403SL	24V	3A	L160xW86xH55.5
	PF2403A5SL	24V	3.5A
	PF2404SL	24V	4A
	PF2405SL	24V	5A

Description

Introduction:The 150W SL series of high frequency battery charger features wide-range AC input adapting to any single-phase grid worldwide with a peak efficiency of 85%. It can be programmed to charge various types of battery packs, and widely used for wheelchairs, mobilities, scooters, E-bike, floor cleaners, etc.
size:length x width x height(mm)
housing(IP21):L160*W86*H55.5

Parameters

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dinmensions(mm)
150W	PF2403SL	24V	3A	L160 × W86 × H55.5
	PF2403A5SL	24V	3.5A
	PF2404SL	24V	4A
	PF2405SL	24V	5A

DC Output	24VDC	36VDC	48VDC
Max. DC output voltage	33.6V	50.4V	67.2V
Max. DC output cuttent	5A	3A	2A
Max. DC output power	150W
Max. interlock current	Pin 3 shorted with Pin 2 (XLR connector)
Support battery types	Wet, AGM, GEL, Li-ion, LiFePO4 and etc.
Protections	Reverse polarity, short circuit, AC surge, sparks and over temperature protection with auto-reset and delay output
AC Input
AC input voltage		100-240VAC ±10%
AC input frequency		50-60Hz ±10%
AC sources		single phase
Environmental
Enclosure grade		IP21(Optional)
Isolation		Class II
Operating temperature		–10℃～+45℃ (–14℉～113℉)
Storage temperature		–20℃～+70℃ (–4℉～158℉)
Regulatory
Safety		EN60335-2-29, SAA & KC, UL1310
EMC		EN55014, C-TICK
Peak efficiency		87%
Mechanicl
AC input connetor		C7 connector
DC output connector		XLR connector as defaul, other types of connector optional
Mounting		Off-board / Portable
Cooling method		Forced ventilation cooling with fan