You are here:Home/Product/Reha Mobility Family/Reha Mobility 150W-2

Reha Mobility 150W-2

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dimensions(mm)
150W	PF2404AL	24V	4A	L151xW90xH55
150W	PF2405AL	24V	5A	L151xW90xH55

Description

Introduction:The 150W AL series of fan-cooled high frequency battery chargers features wide-range AC input adapting to any single-phase grid worldwide with a peak efficiency of 87%. It can be programmed to charge various types of battery packs, and widely used for wheelchairs, mobilities, floor machines, scooters, e-bikes, etc.
size:length x width x height(mm)
housing(IP21):L151*W90*H55

Parameters

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dinmensions(mm)
150W	PF2404AL	24V	4A	L151 × W90 × H55
	PF2405AL	24V	5A	L151 × W90 × H55

DC Output	24VDC	36VDC	48VDC
Max. DC output voltage	33.6V	50.4V	67.2V
Max. DC output cuttent	5A	3A	2A
Max. DC output power	150W
Max. interlock current	Pin 3 shorted with Pin 2 (XLR connector)
Support battery types	Wet, AGM, GEL, Li-ion, LiFePO4 and etc.
Protections	Reverse polarity, short circuit, AC surge, sparks and over temperature protection with auto-reset and delay output
AC Input
AC input voltage		100-240VAC ±10%
AC input frequency		50-60Hz ±10%
AC sources		single phase
Environmental
Enclosure grade		IP21(Optional)
Isolation		Class II
Operating temperature		–10℃～+45℃ (–14℉～113℉)
Storage temperature		–20℃～+70℃ (–4℉～158℉)
Regulatory
Safety		EN60335-2-29, SAA & KC, UL1310
EMC		EN55014, C-TICK
Peak efficiency		87%
Mechanicl
AC input connetor		IEC320/C14 connector
DC output connector		XLR connector as defaul, other types of connector optional
Mounting		Off-board / Portable / On-board(customizable)
Cooling method		Forced ventilation cooling with fan