You are here:Home/Product/Pro Family/Pro 1000W

Pro 1000W

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dimensions(mm)
1000W	PRO1000-24CH30S	24V	30A	L246xW219xH98
	PRO1000-36CH23S	36V	23A
	PRO1000-48CH18S	48V	18A
	PRO1000-72CH11S	72V	11A

Description

Introduction:The PRO 1000 is a sealed series of high frequency battery charger with wide-range AC input adapting to any single-phase grid worldwide with a peak efficiency of 93%, complying with CEC. The charger can be programmed for charging various types of battery packs.It is widely used for floor machines, golf carts, utility vehicles, pallet trucks, aerial work platforms,tow tractors, etc.
size:length x width x height(mm)
housing(IP66):L246*W219*H98

Parameters

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dinmensions(mm)
1000W	PRO1000-24CH30S	24V	30A	L246 × W219 × H98
	PRO1000-36CH23S	36V	23A
	PRO1000-48CH18S	48V	18A
	PRO1000-72CH11S	72V	11A

DC Output	24VDC	36VDC	48VDC	72VDC
Max. DC output voltage	33.6V	50.4V	67.2V	100.8V
Max. DC output cuttent	25A/30A	21A	18A	12A
Max. DC output power	1000W
Max. interlock current	10A
Support battery types	Wet, AGM, GEL, Li-ion, LiFePO4 and etc.
Protections	Reverse polarity a, short circuit, AC surge, sparks and over temperature protection with auto-reset and delay output
AC Input
AC input voltage		100-240VAC ±10%
AC input frequency		50-60Hz ±10%
AC sources		single phase
Max./Nominal AC input current		12A @90VAC / 9.5A @ 120VAC; 5A @ 230VAC
Power factor		>0.99@ 120VAC; >0.98@ 230VAC
Environmental
Enclosure grade		IP66(NEMA4)
Operating temperature		–30℃～+50℃ (–22℉～122℉)
Storage temperature		–40℃～+70℃ (–4℉～158℉)
Regulatory
Safety		EN60335-2-2, UL1012 & UL1564
EMC		EN55014
Peak efficiency		93%, Clifornia Energy Commission (CEC) compliant
Mechanicl
AC input connetor		IEC320/C14
DC output connector		Customizable
Servce port		USB port(Optional)
Mounting		Available for on-board, off-board or mounting on wall, etc.
Cooling method		Natural comvection cooling via optimal heat sink