You are here:Home/Product/Pro Family/Pro 750W

Pro 750W

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dimensions(mm)
750W	PRO0750-12CH35S	12V	35A	L196xW170xH155.3
	PRO0750-24CH25S	24V	25A
	PRO0750-36CH18S	36V	18A
	PRO0750-48CH12S	48V	12A

Description

Introduction:The PRO 750 is a sealed series of high frequency battery charger with wide-range AC input adapting to any single-phase grid worldwide with a peak efficiency of 94%, complying with CEC. The charger can be programmed for charging various types of battery packs.It is widely used for floor machines, golf carts, utility vehicles, pallet trucks, aerial work platforms,tow tractors, etc.
size:length x width x height(mm)
housing(IP66):L196*W170*H155.3

Parameters

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dinmensions(mm)
750W	PRO0750-12CH35	12V	35A	L196 × W170 × H155.3
	PRO0750-24CH25S	24V	25A
	PRO0750-36CH18S	36V	18A
	PRO0750-48CH10S	48V	12A

DC Output	24VDC	36VDC	48VDC	72VDC
Max. DC output voltage	33.6V	50.4V	67.2V	100.8V
Max. DC output cuttent	25A	18A	12A	8A
Max. DC output power	750W
Max. interlock current	15A
Support battery types	Wet, AGM, GEL, Li-ion, LiFePO4 and etc.
Protections	Reverse polarity, short circuit, AC surge, sparks and over temperature protection with auto-reset and delay output
AC Input
AC input voltage		100-240VAC ±10%
AC input frequency		50-60Hz ±10%
AC sources		single phase
Max./Nominal AC input current		9.5A @ 90VAC / 7A @ 120VAC; 3.7A @ 230VAC
Power factor		>0.99@ 120VAC; >0.98@ 230VAC
Environmental
Enclosure grade		IP66(NEMA4)
Operating temperature		–30℃～+50℃ (–22℉～122℉)
Storage temperature		–40℃～+70℃ (–4℉～158℉)
Regulatory
Safety		EN60335-2-29, UL1012 & UL1564
EMC		EN55014
Peak efficiency		94%, Clifornia Energy Commission (CEC) compliant
Mechanicl
AC input connetor		AC plug or IEC320/C14 connector (customizable)
DC output connector		Customizable
Servce port		USB port(Optional)
Mounting		Available for on-board, off-board or mounting on wall, etc.
Cooling method		Natural comvection cooling via optimal heat sink