You are here:Home/Product/Pro Family/Pro 300W-ws

Pro 300W-ws

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dimensions(mm)
300W	PRO0300-12CH15S	12V	15A	L187xW135xH66.3
	PRO0300-24CH10S	24V	10A
	PRO0300-36CH06S	36V	6A
	PRO0300-48CH05S	48V	5A

Description

Introduction:The PRO 300W-WS is a sealed series of high frequency battery charger with wide-range AC input adapting to any single-phase grid worldwide with a peak efficiency of 92%, complying with CEC. The charger can be programmed for charging various types of batteries.It is widely used for floor machines, pallet trucks, aerial work platforms,tow tractors, electric forklifts, electric wheelchairs, scooters and etc.
size:length x width x height(mm)
housing(IP66):L187*W135*H66.3

Parameters

Power(W)	Model No.	V.Nom.	I.Nom.(CC)	Dinmensions(mm)
300W	PRO0300-12CH15S	12V	15A	L166 × W135 × H59
	PRO0300-24CH10S	24V	10A
	PRO0300-36CH06S	36V	6A
	PRO0300-48CH05S	48V	5A

DC Output	12VDC	24VDC	36VDC	48VDC
Max. DC output voltage	16.8V	33.6V	50.4V	67.2V
Max. DC output cuttent	15A	10A	6A	5A
Max. DC output power	300W
Max. interlock current	5A
Support battery types	Wet, AGM, GEL, Li-ion, LiFePO4 and etc.
Protections	Reverse polarity, short circuit, AC surge, sparks and over temperature protection with auto-reset and delay output
AC Input
AC input voltage		100-240VAC ±10%
AC input frequency		50-60Hz ±10%
AC sources		single phase
Max./Nominal AC input current		4A @ 90VAC / 3A @ 120VAC; 1.5A @ 230VAC
Power factor		>0.99@ 120VAC; >0.98@ 230VAC
Environmental
Enclosure grade		IP66
Operating temperature		–30℃～+50℃ (–22℉～122℉)
Storage temperature		–40℃～+70℃ (–4℉～158℉)
Regulatory
Safety		EN60335-2-29 by TUV SUD, UL1012 & UL1564 by ETL
EMC		EN55014 by SGS
Peak efficiency		92%, Clifornia Energy Commission (CEC) compliant
Mechanicl
AC input connetor		AC plug or IEC320/C14 connector (customizable)
DC output connector		Customizable
Mounting		Available for on-board off-board or mounting on wall, etc.
Cooling method		Natural comvection cooling via optimal heat sink